AMSOIL
OE 15W-40 Synthetic Diesel Oil provides excellent protection and
performance in both on- and off-road diesel engines for the original
equipment manufacturer’s recommended drain interval. It meets API
CJ-4 specifications and is suitable for both modern and older diesel
applications. AMSOIL OE 15W-40 Synthetic Diesel Oil exceeds the
higher performance demands of modern engines and withstands the
stress of heat, soot and acids to help prevent deposits, wear and
corrosion.
AMSOIL,
the leader in automotive synthetic lubrication, produced the
world’s first API-qualified synthetic motor oil in 1972. Trust the
extensive experience of AMSOIL, The First in Synthetics®, to do the
best job protecting your engine.
Meets
Emission System Requirements
AMSOIL OE 15W-40 Synthetic Diesel Oil is a low-sulfated ash
formulation that meets the requirements for low-emission quality
diesel oil and protects under the most severe conditions found in
modern diesel engines. It is compatible with all exhaust treatment
devices and is designed for engines equipped with diesel particulate
filters (DPF).
Extreme-Temperature
Performance
AMSOIL OE 15W-40 Synthetic Diesel Oil is formulated for improved
heat and oxidation resistance over conventional petroleum oil for
cleaner engine operation, maintaining power and fuel efficiency for
superior engine performance. Its dependable cold-temperature flow
assures easier start-up and improved post start-up protection.
Resists
Oil Consumption and Emissions
Due to its low rate of volatility (burn-off), AMSOIL OE 15W-40
Synthetic Diesel Oil is able to reduce oil consumption and emissions
during operation. It maintains its excellent film strength even
during high-temperature operating conditions to ensure dependable
protection, performance and fuel efficiency.
Controls
Soot-Thickening and Wear
AMSOIL OE 15W-40 Synthetic Diesel Oil is formulated with premium
synthetic base stocks and robust detergent/dispersant additives that
keep soot particles from agglomerating and forming larger
wear-causing particles. The AMSOIL OE 15W-40 Synthetic Diesel Oil
formulation allows for optimal soot-related viscosity control to
maintain stay-in-grade performance.
APPLICATIONS
AMSOIL OE 15W-40 Synthetic Diesel Oil is recommended for diesel
engines and, where appropriate, gasoline engines requiring any of
the following specifications:
•
API CJ-4, CI-4+, SM...
• ACEA E9
• DDC 93K218
• Cummins CES 20081
• MB 228.31
• CAT ECF-3, ECF-2, ECF-1-a
• Mack EO-O Plus
• Volvo VDS-4
• MAN 3575
• Renault RLD-3
• MTU Type 2.1
COMPATIBILITY
AMSOIL OE 15W-40 Synthetic Diesel Oil is compatible with
conventional and synthetic motor oils. Mixing AMSOIL motor oils with
other oils, however, will reduce the performance benefits.
Aftermarket
oil additives are not recommended for use with AMSOIL motor oils.
SERVICE
LIFE
AMSOIL OE 15W-40 Synthetic Diesel Oil is recommended for the
intervals stated by the original equipment manufacturer (OEM). Refer
to the owner’s manual for specific oil change interval
recommendations. AMSOIL recommends the oil filter be replaced at
each oil change as recommended by the OEM. When using an AMSOIL
By-Pass Filtration System, refer to the By-Pass Oil Filter data
bulletin (G498) for more information.
HEALTH
& SAFETY
This product is not expected to cause health concerns when used for
the intended application and according to the recommendations in the
Material Safety Data Sheet (MSDS). MSDS’s are available upon
request at 715-392- 7101 or on
the AMSOIL Website. Keep Out of Reach of Children. Don’t
pollute. Return used oil to collection centers.
For
AMSOIL warranty information, click
here.